Your One Stop for All Chemicals
Industrial • Marine • Cleaning
+968 9948 9269 / +968 9396 0629
WhatsApp / Call Us Anytime
omanchem.com@gmail.com
Drop Us a Line
Muscat, Sultanate of Oman
Locate Us

Blog Grid View

By blog on 11 Jun 2020 7:46 AM
  • TCU Neutralizer ( Tannin/coffee/urine) Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of TCU Neutralizer ( Tannin/coffee/urine) in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:

TCU Neutralizer ( Tannin/coffee/urine) : RXSOL-41-8760-025
Tannin/coffee/urine RXSOL TCU Neutralizer is multi purpose polymer surfactant and acid detergent which is very useful for spotter and urine neutralizing treatment. As a spotter it is outstanding at removing brown or yellow tannin stains such as from coffee, tea, wine, soft drinks, most beverages, perfume and salt based materials such as many ice melters.


Product Application:
Using Procedure:
Urine Pre-treatment: Saturate affected area, allow to dwell 5 to 15 minutes, agitate, rinse and extract with clear water. Extraction with a Water Claw is ideal.
Spotter: For best results, allow 2 to 3 minutes absorbing and reactivel time.
Typical Dilution Ratio:
Urine Pretreatment – 1:4 to 1:16 with water depending upon severity.
Spotter – Ready to use.


Product Note:

Product Technical Specification:

pH: 2.8-3.5
Available Packing Size: 25 Ltr.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of TCU Neutralizer ( Tannin/coffee/urine) using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of TCU Neutralizer ( Tannin/coffee/urine) Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id
theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

By blog on 10 Jun 2020 2:35 PM
  • Water Stain and Deposit Remover Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Water Stain and Deposit Remover in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:

Water Stain and Deposit Remover : RXSOL-15-1069-005
This product is a highly useful for rapid removal of acid-soluble debris, Hard water deposition, Alkaline films and residues may be effectively removed from stainless steel, porcelain, ceramic tile, grout, sinks, bathtubs, shower stalls, windows, and cooking equipment with regular use of this product, thereby eliminating the need for expensive, time-consuming procedures. In janitorial and industrial applications, this product is ideal for removal of oxides and carbonates which accumulate on metallic surfaces causing a dull, filmy appearance.  Dilutes with water up to 1 : 30 depending on application.


Product Application:
Using Procedure:
Dilute with water to concentration desired for effective cleaning:
Heavy Encrustations: 1:4 Cooking Equipment: 1:20 Ice Machines: 1:15
Descaling Swimming Pools: 1:10 Removing Milkstone: 1:30 Stainless Steel Tanks: 1:15
Spray or brush diluted solution onto surface and allow to remain in contact for 3 to 5 minutes or as
required to do the job. Rinse thoroughly with clear water to remove residue. Use a potable water rinse if equipment is used with food products.


Product Note:

Product Technical Specification:

Available Packing Size: 5 Ltr.


Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Water Stain and Deposit Remover using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Water Stain and Deposit Remover Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id
theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

By blog on 10 Jun 2020 1:17 PM
  • Slop Oil Breaker 25 Ltr Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Slop Oil Breaker 25 Ltr in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:

Slop Oil Breaker 25 Ltr : RXSOL-20-2006-020
RXSOL-20-2006-020  has the unique feature that dissociates slop to seperate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker ‘C’ cleaners.
 

Product Application:
Using Procedure:
For light contamination dilute with water in the ratio 1:20 . For medium contamination dilute with a petro solvent. And for heavy contamination concentrated RXSOL-20-2006-020  is suggested.
For Engine Room & Cargo Tank Cleaner
Product Description:- RXSOL-20-2006-025 is an all purpose degreaser  emulsifiers, It is an excellent blend of powerful solvent base and emulsifying inorganic products .Specially designed  for engine room and cargo  tank cleaning .Main feature of RXSOL-20-2006-025 is, it finally dissociate slop emulsion  to separate oil and water .This provide us with ability to dispose of waste solution as per MARPOL & IMO rules and regulation .

Dosage:- Dose rate and results will vary depending on amount of contamination . For light contamination dilution with water up to 1:20 is recommended where as medium contamination dilution with Petro solvent , And for heavy contamination neat RXSOL CB 2006 is suggested to use.

Procedure of use :- RXSOL-20-2006-025 is  recommended for local cleaning & degreasing of engine rooms, bilges & tank  tops. It may be applied by brush, spray, immersion, soaking, or  any  other  conventional  means.RXSOL-20-2006-025 is used  neat. Allow a residence time of at least 20- 45 minutes where  possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure.The emulsion residue after cleaning must be allowed  to separate  in a holding tank for at least 3-5 hours before passing through an oily water separator.

Tank Cleaning after Mineral Oils/ Lube Oils / Slope-Black Oil
1 )Fill the tank with 1-35 litres per ton wash water.Best results are obtained when water is heated to a   temperature  between  65°C & 80°C  then  stripped  constantly and transferred  to a holding  tank  for  separation.The time for this will vary depending on amount of RXSOL-20-2006-025  used & nature of oil being cleaned.Generally,12 hours should be sufficient before the water phase can be removed.
2) Direct Cleaning.Spray directly RXSOL-20-2006-025 on tank surfaces to be cleaned, left  for at least 30  minutes.Finally wash with hydro-gating (high pressure) machine. Hot water between 50°C & 80°C recommended.


Product Note:

Product Technical Specification:

Available Packing Size: 20 , 25 Ltr.


Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Slop Oil Breaker 25 Ltr using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Slop Oil Breaker 25 Ltr Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id
theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

By blog on 10 Jun 2020 12:03 PM
  • BARRIER HOLD COAT 210 Ltr Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of BARRIER HOLD COAT 210 Ltr in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:

BARRIER HOLD COAT 210 Ltr : RXSOL-22-2211-210
BARRIER HOLD COAT is a highly effective  Eco-friendly Product  blending of natural ingredients which is provide thin temporary film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulfur, Salt, Petcoak, Cement etc and Hold surface .It  can be easily applied by vessel  crew before loading. BARRIER HOLD COAT is  effectively prevents stains and footprints of cargoes adhering to the surfaces of cargo holds and causing corrosion and are difficult to clean. Therefore, cargo holds can be kept clean with much less effort and cost.The main advantage of  BARRIER HOLD COAT is that it forms a water soluble cargo hold barrier that can be removed very easily, even with the use of cold sea water.  BARRIER HOLD COAT is safe to the environment and to the personnel handling it, and will not contaminant the cargo. It is non-corrosive and safe on all coatings. BARRIER HOLD COAT acts as a barrier and release agent between the cargo hold surface and the next cargo. It should be applied on clean surfaces.
Other Important materials , which help to control corrosion on metal surface. Chemically SULPHUR producing STRONG acid in presence of  moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralization method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and using procedure.

 
Product Application:

The cargo hold surfaces should be as clean and dry as possible before treatment.  Barrier Hold Coat is supplied at ready-to use concentration and may be applied directly from the drum. Spray the liquid on the cargo hold surfaces by the use of suitable low-pressure spraying equipment. As soon as the surface appears water wet, a proper film is created; do not apply more than necessary. Barrier Hold Coat will cover 15-20 m2 / Ltrs. Allow the film to dry completely before loading the cargo. Depending on air temperature and humidity this will take 1 to 2 hours. After reloading, apply a 2 -  5% solution of a cleaning agent in water to avoid re-deposition of contaminants, and finally flush with clean, high pressure water. Suitable cleaning agents like Rxtuff, Rxtuff High Foam or Aquabreak Rx.
After flushing with water, let the surfaces dry and then repeat the treatment with applying  Barrier Hold Coat before next cargo.
Features:

  • Water soluble cargo hold barrier  easily removable with water
  • Saves cleaning time and cleaning chemicals
  • Ideal when cleaning after coal, pet coke and other difficult cargoes.
  • Completely safe on all coatings.
  • Prevents even the most difficult cargo to adhere to the coating
  • Easy to apply  easy to remove
  • Provides temporary protection against corrosion
  • Water based – free from hydrocarbon solvents.
  • Complies with all environmental regulations

Product Note:
This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.
Precaution :
Deposition of previous cargo /  Lime wash should be removed .
Newly Painted surface should be fully cured.


Product Technical Specification:

Available Packing Size:  210 Ltr.


Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of BARRIER HOLD COAT 210 Ltr using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of BARRIER HOLD COAT 210 Ltr Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id
theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

By blog on 10 Jun 2020 9:47 AM
  • Alkleen Safety Liquid 50 Ltrs Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Alkleen Safety Liquid 50 Ltrs in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:

Alkleen Safety Liquid 50 Ltrs :RXSOL-20-2004-050
Alkleen safety liquid supplier at all Indian and the Middle East coastal. The importance of alkleen safety liquid increases when next cargo is FOOD GRAIN. As it contains non-hazardous ingredients and is free from caustic. Alkleen safety liquid is also suitable for soft metal surfaces like zinc, aluminium, copper, brass, tin etc…


Product Application:
RXSOL-20-2004-025  is a mixture of emulsifiers, surfactants, corrosion inhibitors and rust preventives, being non – caustic, very gentle on hand & ideal for cleaning walls, wood works, metal and other areas. Prevents the corrosion of metal such as zinc, aluminium, copper, brass and tin. Specialized for ship cargo,  tank cleaning and gas freeing of tanks.

Using Procedure:
RXSOL-20-2004-025  is a high quality product classified as a pet coke residue general remover/cleaner applied to cargo and storage tanks as well as to other systems. Furthermore, it removes carbonaceous deposits.This powerful concentrated formula provides immediate and efficient results while it acts as an odour eliminator.
1st of all by stripping and air blowing method removes all possible cargo residue and oil (greasy materials).


Product Note:
RXSOL-20-2004  has a deodorizing nature and is not flammable.
RXSOL-20-2004-025 contains  corrosion  inhibitors to  prevent the corrosion of metals  such  as Zinc,  Aluminium,  Copper ,  Brass  and  Tin. RXSOL-20-2004-025 is designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease,  Oil,  Heavy  oils  etc. Specialized for Cargo Tank cleaning,Gas /Hydrocarbon  freezing  of tanks.


Product Technical Specification:

Available Packing Size: 25, 50,  210 Ltr.


Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Alkleen Safety Liquid 50 Ltrs using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Alkleen Safety Liquid 50 Ltrs Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id
theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates

By blog on 10 Jun 2020 2:52 PM
  • Coffee Machine Boiler Descaler Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Coffee Machine Boiler Descaler in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:

Coffee Machine Boiler Descaler : RXSOL-11-1052-050
Half fill boiler of Coffee Machine with water and boil. Unplug electrical connection and slowly add the one spoon powder contents of RXSOL-11-1052-050. Leave for just 10 minutes chemically developed RXSOL particle will dissolves hard and old lime scale deposits from surface of appliances. It extends the life of the appliance and saves running cost. It can also be used in appliances such as Washing Machines, Dish Washers, Geysers, Steam Iron, Coffee Makers, Bath Tubs, Bathroom Fixtures etc.
Can improve lifetime and performance. Easy to use in conjunction with your appliance.


Product Application:
Directions
Kettle (suitable for all types of kettle including plastic).
Half fill kettle with water and boil. Unplug and slowly add 1 spoon of RXSOL-11-1052-050 . Leave for just 10 minutes and see how effectively Oust removes limescale.
Coffee Makers
Half fill water reservoir and add 1 spoon of RXSOL-11-1052-050,  Leave for 10 minutes and filter solution through.
Steam Irons (Check manufacturer's instructions before use)
Heat iron until it is hand hot and then unplug. add 1 spoon of RXSOL-11-1052-050 in a jug and pour into iron's water chamber, top up with and set to steam. Leave for 10 minutes for solution to drain through steam holes.
Shower Heads
D
etach shower head or sprinkler nozzle and place in jug. add 1 spoon of RXSOL-11-1052-050 into jug and add hot water. Leave for 10 minutes.
To keep appliances good-as-new and running efficiently, descale every 3 months in hard water area and every 6 months in soft water areas.
Using Procedure:
Fast Effective – Removes Prevents build up of Limescale – Specially Formulated Descaler. This product is all purpose descaler.
The steam boiler which has solid mass of mineral deposits approximate mass calculation will help to use proper volume of RXSOL-11-1052-050  Descaler.  
For home appliances , brewing shop 1 – 3 Table spoon is sufficient to clean.
As for the other parts, The RXSOL-11-1052-050 works more quickly with hot water than cold. Try using RXSOL-11-1052-050 with the hot maintain the temperature. And give sufficint time to dissolve mineral deposits in some cases complete dissolving may reuqire bath water above 100F over night period.

Home application:
Around two tablespoons to a liter of water is a 'normal' mix. You could go 3 or 4 tablespoons for heavier scale. When I do my every 6 months descale I use the 2 tablespoons per liter mix and it works just fine. Hot water is more aggressive so when you put all the parts in a tub to descale, put your water and RXSOL-11-1052-050 in a bit stock pot, bring it to a low boil then dump it in your tub with the parts.
Al most forgot, do not use an aluminum pot or Teflon coated. Use stainless. The acidic part of RXSOL-40-1048-025 will eat up the aluminum and may blister the Teflon.


Product Note:

Product Technical Specification:

A high strength commercial descaling fluid to attack stubborn lime scale caking inside dish washing machines and other stainless steel equipment within the commercial catering environment. Descaler must be diluted before use using a 30ml 5lt pelican pump.

Dishwashers/Glass washers
Switch off the electronic wall mounted dosing equipment (if applicable).
Dilute Descaler with up to 20 parts water depending on the degree of scale build up and add directly into the wash tank. For best results, heat water up to working temperature and circulate until all scale is removed.
Drain solution, refill and rinse thoroughly with clean water. Drain again and refill with clean water.

Tea Urns
Fill urn with water and add 10 plunges of Descaler via 30 ml dispensing pump fitted to 5lt container.
Allow approximately 1 hour contact time. If necessary, agitate scale with green scouring pad to remove stubborn heavy scale deposits.
Drain and rinse thoroughly with clean water.

Floors & Hard Surfaces
If you live in a hard water area and your water supply is untreated, routine floor & hard surface cleaning may leave scale deposits that will periodically need to be removed.
Dilute Descaler with up to 20 parts water and wash the floor or surface as you would under normal circumstances. Always rinse the floor or surface after descaling and clean again using the appropriate cleaning product.


Available Packing Size: 1 Kg PWD.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Coffee Machine Boiler Descaler using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Coffee Machine Boiler Descaler Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id
theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

By blog on 10 Jun 2020 1:37 PM
  • COAL REMOVER rx hold 210 Ltr Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of COAL REMOVER rx hold 210 Ltr in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:

COAL REMOVER rx hold 210 Ltr : RXSOL-22-2215-210
A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.
It is free from hydrocarbon solvents, non flammable and biodegradable.
Biodegradable / Non-Toxic / Non-Pollutant.
VERY Cost effective.
Recommended to use spray equipment.
The use of hot water will greatly enhance the effectiveness of the cleaning and should be utilized whenever possible.


Product Application:

  • Use cold – no heating required.
  • Easily dissolves deposits containing carbon , polymer resin etc.
  • Economical to use.
  • Scraping not required.
  • Non- flammable.
  • Helpful for burner tips, fuel injectors and all components fouled by carbon, resin or varnishes.
  • Cleans oil side of fuel heaters, oil coolers, etc.
  • Can be used for cleaning of : -Fuel Oil Filters – Pistons – Piston rings – Valve cage

Using Procedure:
Directions for Use and Dose Rates
Soak Method:-
It may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning and the available downtime.Actually, the user is the best one capable to regulate the quantity and concentration to be used for the situation at hand.In any case, when the accumulation is not heavy, a 50% solution with water must be used. Otherwise,RXSOL-22-2201. can be used undiluted especially when deposition is heavy and hard spots persist.
Cleaning Procedure
Conventional cleaning methods such as a brush,hard sponge, thick and hard broom and /or a mop can be used on heavy duty and hard stain deposits.Note that for heavy accumulations the cleaning procedure might be necessary to be repeated until the results are satisfactory. Furthermore, is important to keep in mind that 1 litre of RXSOL-22-2201 is sufficient to cover a surface area of 8-10 square meters.


NOTE :  Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discoloration is gone.

Product Note:

  • Cleaning time will vary depending on the extract nature and thickness of deposit to be removal.
  • Stubborn deposits should be scrubbed to assist the cleaning operation.
  • Your local Rx CLEANSERS representative will work with you to design the optimum concentration & procedure for your system.
  • RXSOL-22-2201 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-22-2201 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alkalinity Control in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

Product Technical Specification:

Available Packing Size: 210 Ltr.


Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of COAL REMOVER rx hold 210 Ltr using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of COAL REMOVER rx hold 210 Ltr Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id
theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

By blog on 10 Jun 2020 1:54 PM
  • Stainless Steel Cleaner Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Stainless Steel Cleaner in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:

Stainless Steel Cleaner : RXSOL-15-1055-025
RXSOL STAINLESS STEEL CLEANER is the new generation of derived from natural sources. It is an economical, nonflammable, bio based, environmentally sound product that can replace many common petrochemical  based products.
RXSOL STAINLESS STEEL CLEANER contains no acids, silicone or abrasives; will not cause spotting or streaking; and resists fingerprints.  Its rapidly cut through grease and grime while maintaining a safe employee environment. Its leaves a high gloss, fingerprint resistant, protective shine, on all solvent resistant surfaces. Quickly removes tarnish and food stains. It also leaves an anti-tarnish shield for a bright, lasting shine. Convenient liquid with a reclosable lid.


Product Application:
Cleans and polishes in just one operation. Resists finger-printing and masks surface blemishes on stainless steel, chrome, architectural aluminium and laminated plastic. Contains harmless food grade oil petroleum Distillates.
Excellent for use on stainless steel, nickel steel, copper, aluminum, brass, kitchen appliances, washroom fixtures, restaurant and institutional equipment, drinking fountains, decorative metal surfaces, elevator doors, waste paper receptacles.


Product Note:

Product Technical Specification:

Available Packing Size: 25  Ltr.


Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Stainless Steel Cleaner using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Stainless Steel Cleaner Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id t
heomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

By blog on 10 Jun 2020 10:20 AM
  • HBI CARGO Hold Wash Concentrate RX Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of HBI CARGO Hold Wash Concentrate RX in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:

HBI CARGO Hold Wash Concentrate RX : RXSOL-22-2216-210
Accumulation of dust from this cargo on deck or in proximity to cargo spaces shall be removed as quickly as possible. Consideration shall be given to carefully cleaning exposed radio communications equipment to which dust might adhere, such as radar, radio, aerials, vhf installations, AIS and GPS. Hosing with sea water should be avoided.
HBI CARGO Hold Wash Concentrate RX  is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO. it can be used as a powerful stand alone cleaner  for HBI CARGO dust and deposition.
 

Product Application:
HBI at Elevated Temperatures
The Master of the ship must notify the port authorities if hydrogen gas is detected in the ship holds or if abnormal temperatures are measured in the HBI cargo holds. The Harbor Master and qualified personnel are responsible for executing the action plan when a ship or barge arrives with HBI at the following temperature levels:

A. Greater Than 65° Celsius but Less Than or Equal to 80° Celsius
Proceed with the following actions:

  • Before unloading the vessel, measure the HBI temperature in each hold and record the measurements in the temperature log book.
  • Unload the holds in the assigned zone and immediately transfer the HBI to the storage yard zone .

B. Temperature Greater Than 80° Celsius and Less Than or Equal to 150° Celsius
Proceed with the following actions:

  • Before unloading the vessel, measure the HBI temperature in each hold and record the measurements in the temperature log book. This should be done every two hours while the contingency is in effect.
  • Unload the holds with HBI at temperature less than 65º Celsius first, then those containing HBI between 65º and 100º Celsius. Continue unloading HBI with temperatures between 100º and 150º Celsius in the
  • first transfer station, using the movement sense of the belt as a
  • reference.
  • Transfer the HBI from the unloading zone clean and free of debris and flammable material, such as coal, coke and wood to the storage yard indicated by the client as follows:
  • Transfer the HBI during a maximum of three-minute intervals, and dose (i.e., mix the hotter with the cooler material to have an average temperature lower than the hottest one  no water to be used) the HBI that is at temperatures between 100° and 150° Celsius with cooler material for a maximum of two minutes. Stop the vibrating feeders for about five minutes, but keep the conveyor belts in motion. Repeat these steps until finished with HBI removal. While transferring the HBI, inspect the belt transfer system for any sign of overheating. In case of belt overheating, stop the HBI dosing and transfer but keep the transfer belts in motion until they cool. Take special care to avoid pouring water into hoppers and other equipment. Use a front-end loader to spread the HBI to a level of approximate 30 centimetre height to stop the re-oxidation,  Verify that the belts are cooled down and resume HBI transfer per  the previous instructions.


C . Greater than 150° Celsius
Proceed with the following actions:

  • Before unloading the holds, measure the HBI temperature in each hold and record the measurements in the temperature log book. This should be done every two hours while the contingency is in effect.
  • Position the HBI with temperatures greater than 150° Celsius at the end of the reception area and spray with pressurized water. In this case, there is no option but to momentarily cool down the HBI.
  • When the temperature is reduced to between 80º and 150° Celsius , Caution: Do not spray water on hot HBI that is steaming (i.e., emitting water vapor).

Procedure If Hydrogen Concentration Is Over 1% (25% LEL)

  • Inform the shipper immediately and seek expert advice.
  • Keep the natural surface ventilation open at all times
  • Monitor LEL in the holds continuously until level drops to less than 25 %.
  • Avoid any possible ignition source on the vicinity.
  •  Care shall be taken as to prevent any spark generation.
  • Monitor the hydrogen concentration in the holds and keep the surface ventilation (either natural or mechanical) until values fall below 1%.
  • When hydrogen levels are within safe values, proceed as normal.
  • On the contrary, additional ventilation should be applied to the space if available and re-testing should be conducted after a suitable interval.d expert or surveyor.
  • At sea, do not open the troubled hold without explicit instructions from the shipper or appointed expert or surveyor.
  • Ensure there are no possible sources of ignition near the cargo spaces, adjacent spaces or open decks.

Product Note:

Product Technical Specification:

Available Packing Size:  210 Ltr.


Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of HBI CARGO Hold Wash Concentrate RX using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of HBI CARGO Hold Wash Concentrate RX Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id
theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

By blog on 10 Jun 2020 9:23 AM
  • PAINT THINNER (NC) Manufacturer in Oman

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of PAINT THINNER (NC) in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:

PAINT THINNER (NC) :RXSOL-18-1014-025
RXSOL-18-1014-025 is a special blend of advanced technically pure various organic solvents & penetrating agents.
RXSOL-18-1014-025 functions via a unique dual mechanism the penetrating agent reacts with paints components whilst the organic components reacts with metals to form protection film.


Product Application:
This is paint thinner. Designed to improve the flow of a range of alkyd and oil based products. Can also be used as cleaner for pumps and tools before and after painting. THINNER  is a mixture of esters, glycol, alcohol, and aromatic solvents suitable to all nitro products. It is manufactured for reducing lacquers before they are applied by different methods. Quickly reduces the consistency of the lacquer to the required degree. Improves film smoothness of lacquers when applied either by spray or dipping thus extending excellent finish.

Using Procedure:
USE :Adequate ventilation should be provided when this materials is used & solvent resistant gloves & protection clothing should be worn. If there is any danger of splashing a face shield or goggles should be worn.
ADVANTAGES :- Reduced maintenance time. Does not attack Steel, Copper, Aluminium, Other alloys.


Product Note:
FIRST AID & STORAGE :- Contact with skin can cause serious chemicals burns .Avoid contact with skin & eyes.Wear PVC gloves while handling.
Do not take it internally. Splashes of the product or its solutions on the skin or clothing should be washed immediately with copious amounts of water . If the eyes are affected should be washed with water for at least 15 minutes and seek medical attention immediately. Keep drums tightly closed when not in use.


Product Technical Specification:
APPEARANCE:                        Clear Colourless Liquid
DENSITY In g/cm3 at 20°C:     1.
COMPATIBILITY METAL :         No known effect
RUBBER May Swell  

CHARACTERISTIC :-

  • Easy to apply & simple to control.
  • Exhibits excellent ;paints thinning properties.
  • 100% active matter.
  • Dries completely.
  • Protects all common metals from corrosive attack.
  • Reduce down time & maintenance costs.
  • Can be used on all metals & most painted surfaces to remove paints.

GENERAL REMARKS :-Do not store RXSOL-18-1014-210 near heating equipment.

Available Packing Size: 5, 10, 20, 25, 50,  210 Ltr.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of PAINT THINNER (NC) using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of PAINT THINNER (NC) Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id
theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.