Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Glyceryl Mono stearate in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:
Glyceryl Mono stearate : RXSOL-95-1257-025
Glyceryl Monostearate, is a fatty acid derived from vegetable oil, Soy Oil, or Palm Kernel Oil; however, it is also naturally occurring in the human body. This wax-like substance appears white or cream in color and is produced when Glycerin and Stearic Acid undergo esterification. Traditionally, it is used in formulations for its emulsifying properties. Glyceryl Stearate SE also contains Sodium Stearate and/or Potassium Stearate. The “SE” of Glyceryl Stearate SE stands for “Self-Emulsifying,” as it is a self-emulsifying form of Glyceryl Stearate.
Glyceryl monostearate (GMS) is an effective emulsifier used in the baking industry available in the form of small beads, flakes, or powders. In addition to emulsification, GMS is a thickening agent and a  stabilizer.
In baking, it is used to improve dough quality and stabilize fat/protein emulsions.

Composition:

• GMS is a non-ionic ester of glycerol and stearic acid. It is soluble in ethanol at 122°F (50°C) but immiscible with water. It often consists of a mixture of mono, di, and triesters of fatty acids occurring in food oils and fats. They may contain small amounts of free fatty acids and glycerol.

The ratio of hydrophilic to lipophilic moieties, called hydrophilic-lipophilic balance (HLB) is used in classifying emulsions. HLB values range from 0-20 with lower values indicating dominant lipophilic character while higher values indicate hydrophilic character. GMS has a HLB value of 3.8, making it lipophilic and suitable for uses in w/o emulsions, such as batters and doughs, dairy and other products.
GMS is used in a paste form, i.e. mixed with water and other ingredients to improve gel stability. It is an unsaturated monoglyceride and offers better stability than other unsaturated monoglycerides, such as oleic acid.
It is used in the baking industry to:

• Help in the formation and maintenance of uniform dispersions of immiscible solvents.
• Stabilize emulsions via displacing proteins from oil, wax or solvent surfaces.
• Improve bread texture, and retard staling due to its complexation with starch amylopectin
• Improve aeration of doughs and batters.

Product Application:

• GMS has been used in the following applications:
• To improve the physical and rheological properties of the batter and thus better-quality cakes
• In breads such as pain courant Français, Friss búzakenyér, naan and roti
• In sponge cakes and pancakes for aeration.
• Dairy products such as cream, whipped cream, ice cream, cream powder, imitation creams, etc.
• Fruit/vegetable spreads, jams, jellies, marmalades.

Product Note:

Product Technical Specification:

Available Packing Size: 25 Kg.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Glyceryl Mono stearate using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Glyceryl Mono stearate Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Accelerage Sludge Acceleration Agent 210 Ltr in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:
Accelerage Sludge Acceleration Agent 210 Ltr : RXSOL-20-2011-210
Activated Sludge Acceleration Agent
Biostimulation, which employs nutrients to enhance the proliferation of indigenous microorganisms and therefore the degradation of contaminants, is an effective tool for treatment of oil-contaminated soil. Biostimulation promoted the proliferation of bacteria, with Gammaproteobacteria showing the greatest increase. However, the proliferation of fungi was inhibited by the accumulation of the degradation products.

Product Application:
The addition of fertilizers with surfactants and electron acceptors profoundly stimulated the indigenous microorganisms with N1, O1 and O2 species as substrates while those with O3 and O4 species were little affected. An enriched abundance of alkB genes was observed during the degradation of saturated hydrocarbons. Monitoring the kinetics of the microbial community, functional genes and degradation offers a comprehensive view for the understanding and optimization of the biostimulation process.

Product Note:

Product Technical Specification:

Available Packing Size: 210 Ltr.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Accelerage Sludge Acceleration Agent 210 Ltr using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Accelerage Sludge Acceleration Agent 210 Ltr Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of DYE REMOVER-ORG DICHLOR 210 ltr in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:
DYE REMOVER-ORG DICHLOR 210 ltr : RXSOL-20-2018-210
Remove color from cargo tank surfaces. Also acts as a superior quality cleaner / degreaser with high penetrating abilities to remove color from cargo tank surfaces. It is particularly effective when loading color sensitive cargoes such as methanol, isopropyl alcohol, styrene monomer, and ethylene glycol ‘fiber grade.’
RXSOL ORG DICHLOR is a  Mixture of Emulsifier, new technology alkaline REDUCING agent  , And its blend of  Corrosion  inhibitors, Rust  preventive makes it unique and better among all products available in market.

Product Application:
These products become more aggressive with temperature increase, and should not be allowed to dry on tank walls or stored in cargo tanks as cleaning solutions or slops.
ORG DICHLOR Bleach wil Remove odors ,Remove color  ,Improve permanganate time.
Spraying  Following rough washing to a good Water White or better, apply dilute RXSOL ORG DICHLOR to 1 - 3% strength.  First wet the tank surface (spray with DI water), then spray all over with Bleach, wait 30 minute (but do not allow it to dry) and then rinse very well with DI water, including the tank top towards the sump.  To ensure that you have covered all areas properly, this process should be carried out at least twice with good DI water.
Injection no.
Re-circulation  Following rough washing  to a good Water White standard or better, apply dilute RXSOL ORG DICHLOR  to 1-3% strength.  Mix sufficient Bleach with fresh water in the tank and heat this mixture to 40- 50 0 C, circulate through the drop line if fitted and then circulate through butterworth machine for 3 hours.  After re-circulation immediately warm butterworth to (500 C) the tank for 3 hours at maximum pressure, increase the water temperature to 80-85 o C after 45 minutes.  Check (by smell) that there is no Bleach remaining, then fresh water rinse and dry.
*When there are a number of tanks requiring re-circulation, it may be significantly more efficient to make up a large batch or number of batches that can be transferred between  tanks as required.

Product Note:

Product Technical Specification:
Use a strainer at the pump stack when circulating any solution.
Tank Lining Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if a product other than bleach substitute is to be used in any coated space).

Available Packing Size: 210 Ltr.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of DYE REMOVER-ORG DICHLOR 210 ltr using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of DYE REMOVER-ORG DICHLOR 210 ltr Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Tall Oil (Crude rosin) Cleaner in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:
Tall Oil (Crude rosin) Cleaner:RXSOL-20-2041-210

Product Application:
Tall Oil (Crude Cleaning Procedure)
Tall oil is an oxidizing oil and through reaction with oxygen of the atmosphere
it dries and hardens (drying oil). Oxidation occurs in three phases: liquid, gum
and solid. Tank cleaning should be therefore executed as soon as possible after discharge.
 1.   Butter worth the tank 1 hour with hot seawater (60-70° C.)
 2.   Butter worth the tank 1 hour with hot seawater (75° C.). Check if the tank is free of sediments before recirculation cleaning will be started.
 3.    Flush the tank 10 minutes with fresh water to remove the residues of seawater.                                                                        
 4.    Prepare on of the following cleaning solution with fresh water :
                 0.4% RXSOL CTC -VOLC
                 0.4% RXSOL CTC-VOLC
                 2.5% Sodium or Potassium Hydroxide
                 5% RXSOL AL 2005
    5.    Butter worth the tank 1, 5 hour by recirculation.                                    
    6.    Butter worth the tank 1 hour with hot seawater (70-80° C.) Rinse the tank
           with freshwater  
    7.    Butter worth the tank 1 hour with hot seawater (70-80° C.)
    8.    Rinse the tank with freshwater
    9.    Ventilate, mop and dry the tank. Inspect the tank: Depending on the
           Fatty Acid and Resin Acid content of the Crude Tall Oil it might be
           possible that some minor spots of sticky brownish residues are present.
   10.  To remove these residues Butter worth the tank with one of the following solution:
                      3-5% phosphoric acid and 0.4% RXSOL CTC-VOLC; or
                      3-5% nitric acid and 0.4% RXSOL CTC VOLC; or
                       2-5% of a metallic brightener (RXSOL MB 1011) and 0.4% RXSOL CTC- VOLC The cleaning temperature should be moderate (50°C.) Use heating coils not the Butter worth heater.
   11.  Butter worth the tank 0, 5 hours with fresh water
   12.  Ventilate, mop and dry the tank. Tall oil is an oxidizing oil and through
          reaction with oxygen of the atmosphere it dries and hardens (drying oil).
          Oxidation occurs in three phases: liquid, gum and solid. Tank cleaning should
          be therefore executed as soon as possible after discharge.
   13.  Butter worth the tank 1 hour with seawater (60-70°C.)
   14.  Butter worth the tank 1 hour with hot seawater (75°C.). Check if the tank is
          free of sediments before recirculation cleaning will be started.
   15.  Flush the tank 10 minutes with fresh water to remove the residues of  
           seawater.
   16.  Prepare one of the following cleaning solutions with fresh water.
                             0.4% RXSOL CTC-VOLC or alternatively
                             0.4% RXSOL CTC-VOLC
                             2.5% Sodium or Potassium Hydroxide
                             5% RXSOL AL 2005 Butter worth the tank 2.0 hour by recirculation. The cleaning temperature should be approx 60°C (not higher).
   17.  Butter worth the tank 1 hour with hot seawater (70-80°C.)
   18.  Rinse the tank with freshwater
   19.  Ventilate, mop and dry the tank continued Inspect the tank: Depending on the Fatty Acid and Resin Acid content of the Crude Tall Oil it might be possible that some minor spots of sticky brownish residues are present.
   20.  To remove these residues Butter worth the tank with one of the following solution:
                        3-5% phosphoric acid and 0.4% RXSOL CTC -VOLC; or
                        3-5% nitric acid and 0.4% CTC-Cleaner-VLC; or
                        2-5% of a metallic brightener (RXSOL MB 1011) and 0.4% RXSOL CTC   VOLC The cleaning temperature should be moderate (50°C.) Use heating coils not the Butter worth heater.
   21. Butter worth the tank 0, 5 hours with freshwater
   22. Ventilate, mop and dry the tank

Product Note:

Product Technical Specification:

Available Packing Size: 210 Ltr.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Tall Oil (Crude rosin) Cleaner using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Tall Oil (Crude rosin) Cleaner Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Unipol RX in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:
Unipol RX : RXSOL-20-2057-210
Unipol-RX  is a pH-neutral, liquid concentrated detergent with good cleaning qualities. It contains effective but mild and environmentally safe wetting agents and surfactants that allow rapid penetration to remove fats and oils. Unipol is especially suitable for hydrocarbon freeing of tanks, and is safe on all tank coatings including zinc silicate.

Product Application:
Using Procedure:
The most economical method of using Unipol is by recirculation washing, using tank cleaning machines. Make up a solution of 1-5% in preferably fresh water in the tank and recirculate. Whenever possible, the cleaning solution should be heated to 50-80°C. Rinse off with hot fresh water. Alternatively, hand spray the tank with a 20-50% solution of Unipol and allow it to stay for 30-60 minutes before a final rinse with hot water. When the tank is cleaned to a  water white standard , remove any free water and ventilate until the tank is dry.

Product Note:
Features

• Non-caustic, pH neutral.
• Solvent free
• Non-flammable.
• Does not contain nonylphenol ethoxylates or other estrogenic compounds.
• Non-corrosive to metals.
• Suitable for all tank-coatings.
• Can be used for gas and hydrocarbon-freeing of tanks.
• Can be used for deodorizing.
• Complies with all environmental regulations and the EU Detergent Regulation.
• IMO approved and listed in Annex 10 of the MEPC.2/ Circular.

Product Technical Specification:

Available Packing Size: 10 Kg.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Unipol RX using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Unipol RX Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of LAC Alka Liquid HD 210 Ltr in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:
LAC Alka Liquid HD 210 Ltr : RXSOL-20-2015-210
Well balanced alkaline cleaner. It is free hydrocarbon solvents.Gentle & suitable for tank cleaning operation. A very strong alkaline cleaner, which can be used to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc.  It is a low toxic product with an exceptional solvency power on soil & oily  matter.It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials.

Product Application:
It can be used as a general purpose cleaner to remove oil and grease deposits. First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL-20-2015-210 is by direct injection followed by recirculation washing, using tank cleaning machines. Spraying Method  – Using LAC as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages.  Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
** Make sure to take all safety precautions when handling / spraying RXSOL-20-2015-210
Injection Method:  not applicable.
Using Procedure:
Vegetable and Animal Oils (Cleaning Procedure)
For effective cleaning of animal and vegetable oils the first cleaning step is of utmost importance. Vegetable oils are divided in:
  Non-drying products
  Semi-drying products
  Drying products
  Fatty acids Non Drying Products
 1. Butterworth the tank with seawater or freshwater with a temperature 20°C. above the melting point of the product to be cleaned. After sufficient pre-cleaning of at least 1.5 hours the temperature can be increased. Drying and Semi-drying ProductsThese are oxidising products and through reaction with oxygen they will dry and harden. Tank cleaning should be executed as soon as possible after discharge. High temperatures (e.g. cleaning or steaming) and heated cargoes in adjacent tanks should be avoided.
 2. Butterworth the tank with cold to warm seawater or freshwater.If the product has a higher melting point Butterworth the tank with seawater or freshwater with a temperature maximum 10°C above the melting point of the product. After sufficient pre-cleaning of at least 1.5 – 2 hours the temperature can be increased. Fatty Acids or  vegetable/animal oils with high free fatty acid content see the cleaning suggestion of Fatty Acids.
 3. If seawater was used in step 1 it is of utmost importance to flush/rinse the tank with freshwater before cleaning as per step 3 is continued.  
 4. Final cleaning Prepare the following solution in freshwater (see table):
Make solution emulsification 0. 4 % RXSOL-20-2015-210 Butterworth the tank with the prepared solution for 1, 5-2, 0 hours by recirculation. The necessary temperature can be achieved / maintained by means of heating coils, cargo heat exchanger or Butterworth heater. Depending on the amount of product residues the solution can be used for 1 to 4 tanks. On some vegetable/animal oils it is recommended to saponify additionally the product residues (see table): Therefore prepare one of the following solutions (B or C) in
freshwater (see table):
 5. continuedButterworth the tank with the prepared solution for 1, 5-2, 0 hours by recirculation. The necessary temperature can be achieved /maintained by means of heating coil (service tank) cargo heat  exchanger or Butterworth heater. If RXSOL-20-2015-210 is used the  cleaning temperature should be 60-70°C. And  If sodium or Potassium Hydroxide is used the cleaning temperature should be 60.C. If RXSOL-20-2015-210 is used the cleaning temperature can be 70-80°C. Depending on the amount of product residues the solution can be used for 1 to 3 tanks.
 6. Butterworth the tank 1 hour with hot seawater
 7. Rinse the tank with fresh water
 8. Inspect the tank; if white residues or a white film is present (calcium/magnesium soaps or carbonate) Butterworth the tank with one the following solution: 3-5% RXSOL-16-1011-210 ( www.rxmarine.com/metal-brite-210-ltrs-pkg )  The cleaning temperature should be moderate (50°C.) Use heating coils not the Butterworth heater.
 9. Flush the tank with freshwater
10.Ventilate, mop and dry the cargo tank.

Product Note:
Re-circulation Method :
Fill tank with fresh water and heat up to warm 50 oC .IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and LAC to make a 2.5% solution.  A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank.  Under normal circumstances, between 2.5% and 4.5% will be sufficient strength.  If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.

* Use a strainer at the pump stack when circulating any solution.*
  Tank Lining  Stainless / Epoxy / Phenolic

Product Technical Specification:

Available Packing Size: 210 Ltr.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of LAC Alka Liquid HD 210 Ltr using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of LAC Alka Liquid HD 210 Ltr Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of G 50 Marine 210 Ltrs in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:
G 50 Marine 210 Ltrs : RXSOL-20-2026-210
A very strong  cleaner, which can be used to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc.  It is a low toxic product with an exceptional solvency power on soil & oily  matter. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials.

Product Application:

• . Liquid water based strong alkaline cleaning agent.
• · Rxsol G 50 Marine  is a very suitable tank cleaning agent.
• · Removes oil, fats, fatty acids and mineral pollution.
• · Suitable to use on additives (pure).
• · Also used on chemical contamination in tanks.
• · Suitable on ferro metals and stainless steel.
• · Rxsol G 50 Marine is easily washed out of tanks.
• · Can be used with sea water
• · Rxsol G 50 Marine  contains a water-hardness stabiliser

Using Procedure:
First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL G:50,  is by direct injection followed by recirculation washing, using tank cleaning machines. Spraying Method  – Using RXSOL G:50 as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages.  Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
Injection Method :  not applicable.
Re-circulation Method :
Fill the tank with fresh water and heat up to warm 50 oC .IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of RXSOL G:50 to make a 2.5 to 5% solution.  Under normal circumstances, between 2.5% and 4.5% will be sufficient strength.  If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.

Product Note:
** Make sure to take all safety precautions are followed when handling / spraying RXSOL G:50**
Safety Aspects
Avoid contact with eyes and skin.
in case of irritation rinse with plenty of water.

Product Technical Specification:

Available Packing Size: 210 Ltr.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of G 50 Marine 210 Ltrs using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of G 50 Marine 210 Ltrs Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Gasoil Kerosine / Gasoline Cleaner in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:
Gasoil Kerosine / Gasoline Cleaner : RXSOL-20-2051-210

Product Application:

• Gasoil,Kerosine,Gasoline (Cleaning Procedure)
• Butterworth the tanks 1 hours with seawater or freshwater of cold to moderate temperature (flashpoint).

                 Gas oil approx. 50/55°C
                 Kerosene approx. 30/40°C
                 Gasoline cold

• Butterworth the tanks 1 hour with hot seawater or freshwater (60°C)
• Prepare the following cleaning solution in freshwater or seawater:0.4 % RXSOL CTC-VOLC Butterworth the tank 1 hour by recirculation with a temperature of approx 60°C. The necessary temperature can be achieved/maintained by means of heating coils, or going via the Butterworth heater. Depending on the amount of cargo residues the solution can be used for 1 to 3 tanks.
• Butterworth the tank for 0.5 hours with hot fresh water.
• Ventilate, mop and dry the tank.

Instead of recirculation cleaning the RXSOL CTC-VOLC can be injected into the Butterworth system (see cleaning method ).

Product Note:

Product Technical Specification:

Available Packing Size: 210 Ltr.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Gasoil Kerosine / Gasoline Cleaner using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Gasoil Kerosine / Gasoline Cleaner Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of Aquasolv in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:
Aquasolv : RXSOL-20-2070-210
Anti-corrosion rinse additive:
Powerful: Provide up to 6 months corrosion protection for Ferrous metals stored in humid conditions
Efficient :Used at very low concentrations, 2-4% in spray or dip processes
Process  Compatible : Does not adversely affect painting, bonding or adhesion processes after application
Residue Free : Molecular VCI layer leaves non-tacky finish
Simple Disposal: Contains no nitrates or phosphates, was to drain with water

Product Application:
A rinse additive in spray or immersion systems to protect ferrous metals against corrosion for up to 6 months. The Vapour Corrosion Inhibitors form an invisible coating on metal surfaces providing protection against moisture and humidity, whilst not affecting adhesion or the properties of post treatment processes such as painting, bonding, brazing.

Product Note:

Product Technical Specification:

Available Packing Size: 210 Ltr.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of Aquasolv using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of Aquasolv Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.

Oman Chemical is leading one Largest Supplier, Manufacturer and Exporter of RXSOL 666 Tank cleaner in Oman, Sultan Qaboos, Qulhat, Shannah, Duqm, Salalah, Sohar, Gulf of Oman, Khatmat Malaha, Suwaiq , Muscat, Hutchison, Alliwa, Rusayl Industrial Area, Sur, Nizwa and Buraimi Industrial Area.

Product Information:
RXSOL 666 Tank cleaner : RXSOL-20-0666-050
RXSOL 666 is surfactant base highly concentrate Product specially designed to clean Tank Container , Cargo Tank which are carrying Heavy Aromatic , hydrocarbon solvent and, natural Latex etc. Rxsol 666 due to strong concentration provides a quick penetration and powerful reaction to remove stubborn hydrocarbons and other organic deposits, from all types of surface. It is an ideal Product to Clean Tank container, cargo Tank , latex Surface etc. .

Product Application:
Using Procedure:
Rxsol 666 is covering 10-12 square meter are when spraying directly. It is advised to use a solution of 2-5% wash water mixed in the tank to be cleaned. Dose rates and results will vary depending on contamination, the temperature of the cleaning solution, and number of tanks to be cleaned with the solution.
Spot  cleaning
Rxsol 666 can be sprayed neat onto tank surfaces to be cleaned. The contact time should be at least 30 minutes. Bulkheads/walls can be washed down by use of tank washing machines or high pressure cleaning machines. The best result is achieved with warm water. Slops should be constantly stripped from the tank and transferred to a holding tank or pumped ashore to slop tanks.

Rock and Roll method (Cargo Tank)
Cleaning of double bottom tanks during voyages.
Flush tank with sea water, stripping constantly.
After flushing, ensure all suction and discharge valves in the engine room are closed.
Dose tank with Rxsol 666 through the sounding pipe or manhole between 0.5 – 1 litre per ton of water, for   75-80% of the tank's capacity to be cleaned.
Fill the tank to 25% capacity with sea water, raise the temperature up to 60°C and maintain this for 24 hours.
Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
To gas-free, fill the tank with sea water to overflow through vents and sounding pipes, discharge and strip completely.

Product Note:
Features

• Highly concentrated tank cleaner with quick penetration properties
• The product is biological degradable
• Does not contain nonylphenol ethoxylates or other estrogenic compounds
• Versatile, can be used for a wide range of applications
• Easy to use by any conventional man
• Can be used for cleaning and gas-freeing of double bottom, Cargo Tank, Tank Container Etc.
• Easy rinse off, leaving clean and oil-free surfaces
• Safe to use on most metal surfaces, painted surfaces and tank coatings
• Economical, very low dosage rates
• Non Flammable
• Remove Light Rust and Rust Stain .

Handling and storage

• Precautions for safe handling
• Wear protective clothing during Tank Cleaning
• Avoid contact with  neat skin and eyes
• Eyewash bottles should be available
• Conditions for safe storage, including any incompatibilities

Product Technical Specification:

Available Packing Size: 50 Kg. Liq.

Oman Chemical offers highest quality products in Tank cleaning, Drilling Fluid Chemicals, Hold Solution, Agriculture, Lab Chemicals, Raw Chemicals, Sewage Chemicals, Detergent, Degreaser & Floor care chemical.Our in house lab and QC department is strong in equipment, knowledge and system to meet the international standards. We produce a superior range of RXSOL 666 Tank cleaner using advanced manufacturing technology and using superior quality raw materials. We assure quality and ensure that only the best is catered to the customers.Our basic motto of the company is to give a better product to the customer at the lowest rate. We are keeping ready stock of RXSOL 666 Tank cleaner Manufacturer, Distributor, Exporter and supplier in Oman for more information, any support and price, Feel free to contact us through our Email id theomanchem@gmail.com

Free Delivery / Supply Locations :
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates.