PROEDURE OF USE:-

1st Method:-
Mix 1 part of RXSOL-10-1005-025 with 2 -10 parts of water / GAS-OIL  , For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minute of spray the RXSOL-10-1005-025 starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water.

2nd Method:-
Application in immersion process with or without ultrasonic support, manual wipping.

3rd Method:- 
RXSOL-10-1005-025 is also used in conjunction with alkaline degreasing bath at 3-5% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70c or the solution can be stirred or air agitated.

Key Features of Degreaser Heavy Duty

• Superior Cleaning Power – Quickly dissolves and removes heavy oil, grease, wax, carbon deposits, and tough hydrocarbon residues.
• Water Soluble in All Proportions – Easily mixes with water, allowing flexible dilution for light to heavy-duty cleaning.
• Dual Action (Solvent + Detergent) – Solvent base penetrates and loosens stubborn residues, while surfactants disperse and emulsify them for easy rinsing.
• Non-Corrosive – Safe on common metals such as mild steel, copper, aluminium, and also compatible with plastics.
• Reduced Manual Effort – Cuts through thick grease layers without excessive scrubbing, saving time and labor.
• Versatile Application – Suitable for spray, brush, soak, or circulation cleaning systems in marine, industrial, automotive, and workshop environments.
• Residue-Free Rinsing – Emulsifies contaminants and rinses away cleanly, leaving surfaces oil-free and ready for use.
• Safe to Handle – Non-toxic formulation ensures safer handling compared to harsh solvent-only degreasers.
• Economical – Concentrated formula offers high coverage area and low consumption per cleaning cycle.

Keep away from children. Refer MSDS before using this product.

Cement Remover cum cleaner plays an important role to clean cement without scrubbing, which is resulting and damaging the smooth surface.  Its simple application method also helps to save manpower. Youtube cement remover video available with this link https://www.youtube.com/watch?v=GJzrh60-q5w

RXSOL-16-1077-020 must be used in open or  sufficiently ventilated areas. RXSOL-16-1077-020 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as  a fine spray using suitable hand held spray  equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1077-020.  Never use RXSOL-16-1077-020 on a running generator or motor. RXSOL-16-1077-020  can be used to clean virtually all electrical equipment  & components although  is it possible it may affect some types of rubber &  plastic .  Either  remove  rubber  &  plastic  parts  from  component  or test on small area for any reaction before cleaning. 

Phosphate/pH relationship recommended to control boiler corrosion. Different forms of phosphate consume or add caustic as the phosphate shifts to the proper form. For example, addition of monosodium phosphate consumes caustic as it reacts with caustic to form disodium phosphate in the boiler water according to the following reaction:

Conversely, addition of trisodium phosphate adds caustic, increasing boiler water pH: