Your One Stop for All Chemicals
Industrial • Marine • Cleaning
+968 9948 9269 / +968 9396 0629
WhatsApp / Call Us Anytime
omanchem.com@gmail.com
Drop Us a Line
Muscat, Sultanate of Oman
Locate Us
GET A QUOTE

Search form

×
Your shopping cart is empty.

Mold Release Agent

Educational Use Only - Order On Request
Mold Release Agent
Get MSDS Get Technical Bulletin Connect on WhatsApp Request Info
Product Code: RXSOL-90-8150-025

Categories

Asphalt Release / Products-90

Product Description

Mold Release Agent a high-performance non-ionic silicone emulsion specifically designed for use as a mold release agent in cast polyurethane (PU) elastomer applications. It provides excellent release properties, surface finish, and mold protection without interfering with curing or post-processing operations.

The non-ionic nature ensures broad compatibility with PU systems, pigments, fillers, and additives, while minimizing surface defects, buildup, and transfer.

Product Short Description

A non-ionic water-based emulsion designed for effective mold release in cast polyurethane elastomer applications, providing multiple releases per application with clean surface finish and broad material compatibility.

Product Application

Mold Release Agent is widely used for:
  • Cast polyurethane elastomers
  • PU rollers, wheels, bushings
  • Industrial PU parts
 
Mold Release Agent also suitable for:
  • Metal molds
  • Epoxy molds
  • Silicone and composite molds (after compatibility check)

Product Dose

How to use RXSOL Mold Release Agent

  1. Clean mold thoroughly before first use
  2. Dilute product with clean water as recommended
  3. Apply by: Spray or Brush
  4. Wipe with lint-free cloth
  5. Allow to dry completely before casting
  6. Reapply as required based on cycle count
Compatible with:
  • Polyester-based PU systems
  • Polyether-based PU systems
  • Filled and unfilled formulations
  • Not recommended to mix directly into PU resin
  • Compatibility testing advised before large-scale use

Dilute the product using water with a hardness not exceeding 250 ppm (expressed as CaCO₃), adjusting the dilution level according to the intended application technique, such as spray or pad application. The molds should be completely clean before treatment. Typically, one treatment with Mold Release Agent will remain effective for two to ten molding cycles, depending on the design complexity of the mold and the type of material being molded.

Remarks

Key Features of RXSOL Mold Release Agent Emulsion

  • Excellent mold release performance for PU elastomers
  • Non-ionic – compatible with most polyurethane systems
  • Produces smooth, defect-free surfaces
  • Reduces mold fouling and buildup
  • Improves mold life and productivity
  • Water-based, low VOC, non-flammable
  • Does not interfere with painting, bonding, or post-finishing when properly used

Other Equivalent Brand

BLUESIL EMUL 1803, Mold Release Agent

Free Delivery / Supply Locations

Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Fujairah, Sharjah, Umm Al Quwain, Ruwais, Khalifa Port, Jebel Ali, DP WORLD, and all UAE ports...