Filter Clean Special HD – Coil Cleaning Procedure

Before Starting:
Ensure the unit and all fans are turned off for safety.

Step 1 – Prepare the Cleaning Solution

• Mix 1 part Filter Clean Special HD with 5 parts water.

• Important: Always add water to the sprayer tank first, then add Filter Clean Special HD.
  (add Filter Clean Special HD first, then water.)

Step 2 – Apply the Solution

• Using a  sprayer, thoroughly spray the cleaning solution on the coil plates.

• Ensure complete coverage on all surfaces of the plates.

Step 3 – Dwell Time

• Allow the cleaning solution to remain on the surface for 5–15 minutes to loosen dirt, grease, and residues.

Step 4 – Rinse Thoroughly

• Rinse off all coil surfaces using a hose or the system’s built-in spray nozzles (if equipped).

• Use hot water, if available, for enhanced cleaning performance.

Step 5 – Repeat if Necessary

• For heavily soiled units, repeat Steps 2 through 4 until the coils are fully clean.

Why Customers prefer Alkaline Coil Shine Coiler Cleaner Non Acid?

• Reduce air-conditioning cost  by allowing air-conditioning systems and units to run at maximum efficiency , Saves energy costs

• A proper regular maintenance program including the use can substantially lengthen condenser life and save equipment replacement and downtime.

• Cuts quickly through oily grime and Industrial air-borne impurities to restore condenser coils.

• Due to its high penetration effect ,  Agitation or Scrubbing doesn't require

• Simple spray on off operation to restores dirty condenser coils to peak efficiency

Do not allow concentrate to come in contact with skin. Avoid contact Eyes and clothing. Alu Brightener is a concentrated liquid acid formulated .
First Aid: Skin Contact: Wash area with soap and water. Rinse with a solution of vinegar and water. If irritation persists seek medical attention
Eye Contact: Flush with water for 15 minutes. Obtain medical attention
Ingestion: Drink several glasses of fruit juice. Do not induce vomiting. Obtain immediate medical attention.

Do not allow concentrate to come in contact with skin. Avoid contact Eyes and clothing. Alu Brightener is a concentrated liquid acid formulated .
First Aid: Skin Contact: Wash area with soap and water. Rinse with a solution of vinegar and water. If irritation persists seek medical attention
Eye Contact: Flush with water for 15 minutes. Obtain medical attention
Ingestion: Drink several glasses of fruit juice. Do not induce vomiting. Obtain immediate medical attention.

How to Cleane Ice Maker Machine?

1st for Ice Maker Component Cleaning: Dip BATH process.
Takes 100 ml of  RXSOL Ice Machine Cleaner for 3 Ltr  of warm water in plastic container and immerse components in solution. Soak the components until they are free of deposits; for stubborn or thick deposits use a soft brush to help the dissolving action

2nd for Circulation system Cleaning: Recirculation Method.
Use 100 to 150 ml of RXSOL Ice Machine Cleaner in 3 Ltr water in the machine. Allow cleaning solution to circulate for up to 10-20 minutes; it may be necessary to recirculate the solution for longer than 10 minutes to remove heavier and thicker scale deposits. Be sure all distribution and weep holes are clear.

How Scale formed in Ice Maker Machine?

Dissolved Mineral or presence of mineral present in water is cause of SCALE FORMATION in ICE MAKER. Water tries to freeze in its pure state, while mineral present in water getting precipitate. As the cycle continues and more water is made into ice, the minerals over concentrate and eventually precipitate as a lime scale deposit.

Why Regular Cleaning of SCALE is essential from Ice Maker?
 

This is an inhibitor concentrate / chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and alloys that are used in cooling systems.It is especially appropiate for the use in heavy-duty engines such as those used in trucks,  ships and lokomotives.

• High performance corrosion inhibitor
• Being a nitrite free product it is compatible also with zinc - coated piping
• Easy control test with refractometer.

This is an inhibitor concentrate / chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and alloys that are used in cooling systems.It is especially appropiate for the use in heavy-duty engines such as those used in trucks,  ships and lokomotives.

• High performance corrosion inhibitor
• Being a nitrite free product it is compatible also with zinc - coated piping
• Easy control test with refractometer.

Filter Clean Special HD – Coil Cleaning Procedure

Before Starting:
Ensure the unit and all fans are turned off for safety.

Step 1 – Prepare the Cleaning Solution

• Mix 1 part Filter Clean Special HD with 5 parts water.

• Important: Always add water to the sprayer tank first, then add Filter Clean Special HD.
  (add Filter Clean Special HD first, then water.)

Step 2 – Apply the Solution

• Using a  sprayer, thoroughly spray the cleaning solution on the coil plates.

• Ensure complete coverage on all surfaces of the plates.

Step 3 – Dwell Time

• Allow the cleaning solution to remain on the surface for 5–15 minutes to loosen dirt, grease, and residues.

Step 4 – Rinse Thoroughly

• Rinse off all coil surfaces using a hose or the system’s built-in spray nozzles (if equipped).

• Use hot water, if available, for enhanced cleaning performance.

Step 5 – Repeat if Necessary

• For heavily soiled units, repeat Steps 2 through 4 until the coils are fully clean.

APPLICATION METHODS:

Low pressure, acid resistant tank sprayers are recommended.
Regardless of application method, avoid inhalation of mist or contact of liquid or mist with skin.

SUGGESTED INSTRUCTIONS FOR USE:

•  When handling RXSOL-16-1697-005 or any other strong chemical, be sure to wear chemical imperviousgloves,apron and splash goggles.
   
• Determine required dilution ratio for the specific application. It is recommended to start with a dilution ratio of 10:1 and increase concentration until the desired results are achieved.
   
• As with mixing all acids, place the desired amount of water into the tank and then add RXSOL-16-1697-005.
   
•   Turn off fans and allow hot coils to cool before applying.
   
• Using plain water, wet both the condenser coil as well as the area surrounding the equipment. Wetting the coil with water aids in product penetration and performance.
   
• Apply the properly diluted product to the coil surface. Whenever possible, apply solution from the outlet side of the coil. Allow product to remain on surface, normally 5-10 minutes. Do not allow product to dry on the coil. Note: In extreme cases, application may have to be repeated to achieve desired results.
• If foaming does not occur, check for extreme grease buildup which will slow cleaning process. Foaming may not occur if coil is coated or painted.
   
•   Rinse coils, tools and surrounding area thoroughly after completing the coil cleaning process

CAS No. : 7550-35-8

Molecular Formula : LiBr

Lithium Bromide, Lithium Bromide 55% & Lithium Bromide Anhydrous Manufacture and Supply by our company with affordable and compititive price.